Human Factors in Health and Safety
Modular training for the process industries
Now available online
"Human Factors in Health and Safety took my understanding of human factors to a new level. It is geared towards providing practical support to delivering a human factors improvement agenda and has given me the confidence to lead the human factors agenda at a top tier site/operation. I would highly recommend this course."
There is an increasing emphasis on the importance of managing human factors – how the people, the job and the organisation interact as a whole – to achieve improved safety and business performance in the chemical process industries.
Major accidents, including those at Texas City, Buncefield and Longford, have highlighted the importance of addressing this aspect of performance. Yet many of the safety and operational professionals charged with managing human factors have no formal qualifications or training in the human and behavioural sciences.
Human Factors in Health and Safety addresses this gap by providing modular training designed to increase understanding of the key human factors issues relevant to safety in the process industries. Training is held in the UK and Australia, and is also available online.
Jointly developed in 2009 by IChemE and the Keil Centre, a recognised centre of excellence in human factors, the programme focuses on how to manage human factors effectively in order to drive safety standards and overall business performance.
Human Factors in Health and Safety consists of four modules, supported by independent study, which together provides a broad human factors educational programme.
The modules are independent of each other and can be completed in any order. You can sign up for all four to get a comprehensive overview of human factors, or attend single modules to develop understanding in a particular area.
- Understand what human factors is and how it affects human performance, health and safety
- Understand how human factors needs to be managed within an organisation, including the scope and involvement of different parties
- Develop knowledge about specific topic areas related to major accidents and how to reduce the related risks
- Understand and gain practical use of common tools and techniques used within human factors
- Understand how to apply certain human factors tools
- UK participants – act as the COMAH operator's intelligent customer for human factors*
Who will benefit
Those looking for a comprehensive overview of human factors, access to practical research-based tools and approaches, and discussion in small groups with acknowledged industry experts. This may include:
- HSE managers and advisors
- operations managers
- safety engineers
- chemical/process engineers
- in-house human factors advisors.
Specific engineering disciplines (eg control and instrumentation, piping, electrical, mechanical) may be interested in Module 4 – Human Factors in Design.
- Human factors in risk management
- Managing safety critical communications
- Managing safety culture and behaviours
- Managing organisational change
- Reducing human error
- Managing non-compliance
- Human factors in incident investigation
- Managing performance under pressure
- Managing fatigue
- Staffing and workload
- Training and competence
- Effective supervision and safety leadership
- Integrating human factors in design
- Developing effective procedures
- Human machine interface
- Plant and control room design
Topics are organised to cover the UK Health and Safety Executive's top human factors issues in major hazard sites, but these topics are just as applicable and relevant to non-UK regulatory frameworks.
Follow the links below to see what's covered on each module and to book a place.
Training is delivered by recognised human factors professionals with significant process industry experience. They will provide practical advice, tools and approaches to help you implement human factors solutions at your organisation.
- Module One – Managing Human Factors, 14–17 September 2020
- Module Two – Managing Human Failure, 12–15 October 2020
- Module Three – Strengthening Organisational Performance, 9–12 November 2020
- Module Four – Human Factors in Design, 14–17 December 2020
For each online module, teaching will be delivered via:
- four live sessions (approximately two hours in length each, and with a choice of session times) over the four consecutive days
- pre-course reading and some independent study using pre-recorded videos
The number of places on each session is limited to eight to ensure maximum contact time with the trainers. Early booking is advised.
Face-to-face training – UK
- Module One – Managing Human Factors, 24–25 February 2021
- Module Two – Managing Human Failure, 21–22 April 2021, Edinburgh, UK
- Module Three – Strengthening Organisational Performance, 8–9 September 2021, Edinburgh, UK
- Module Four – Human Factors in Design, 8–9 December 2021, Edinburgh, UK
Face-to-face training – Australia
- Module One – Managing Human Factors, 24-25 February 2021, Perth
- Module Two – Managing Human Failure, 26-27 May 2021, Perth
- Module Three – Strengthening Organisational Performance, 25-26 August 2021, Perth
- Module Four – Human Factors and Design, 10-11 November 2021, Perth
Previous delegates say
"Human Factors in Health and Safety took my understanding of human factors a new level. It is geared towards providing practical support to delivering a human factors improvement agenda and has given me the confidence to lead the human factors agenda at a top tier site/operation. I would highly recommend this course."
Ian Taylor, Process Safety Assurance Engineer, SABIC Petrochemicals, UK
"Human Factors in Health and Safety is ideal for anyone who wishes to become an intelligent customer in the subject...For anyone with responsibilities for major hazard sites, the course provides an excellent learning opportunity and is an important addition to the health and safety toolbox."
Ron Ramshaw, Head of HSSE, Interconnector, UK
"This course has opened my eyes to the untapped potential to be more proactive, incorporating human factors not just in our production facilities but at every level and every part of our global organisation."
Thomas Willer, Occupational Safety and Health Manager, Evonik Corporation, USA
Download a brochure
- Download the Human Factors in Health and Safety brochure for the UK programme
- Download the Human Factors in Health and Safety brochure for the Australian programme
How to book
Follow the links above where you will find a registration link.
This course is also available as an in-company course (face-to-face or online) where content can be customised to meet your organisation's specific needs and delivered on a date/location that suits your requirements. Contact us for more information.
Register your interest
In partnership with
* The COMAH delivery guide has a specific clause relating to technical competence in human factors, suggesting that COMAH operators should demonstrate proportionate access to HF expertise.
This can be supplied as external competent support (such as from a Chartered Human Factors Specialist accredited by the Chartered Institute of Ergonomics and Human Factors). However, it is emphasised that the COMAH operator must maintain an effective intelligent customer capability and secure local ownership of key HF standards and their implementation, developing and maintaining a suitable level of in-house HF expertise.
Human Factors in Health and Safety aims to develop a broad understanding of human factors in support of the in-house human factors advisor who acts as the COMAH operator’s intelligent customer.