Overview

This webinar addresses the following concerns and challenges:

• Property estimation, specifically density, heat capacity, and heat of vaporization. Property packages in commercial process simulators are tuned for “common” operating ranges and composition profiles. In this case, it was found that default tuning parameters may yield errors of up to 20% on CO2 density, making retuning necessary.
• “Typical compressor configurations” may result in dry ice formation (CO2 freeze out). It is necessary to revisit compressor train configurations to prevent this from occurring.

Speaker

Ir. Rafil Elyas, Principal Engineer, East One-Zero-One Sdn Bhd

Ir. Rafil Elyas is the founding Principal Engineer of East One-Zero-One Sdn Bhd (East101), a specialist process engineering and flow assurance consultancy company. He has 30 years' work experience using and developing dynamic/transient simulation software for design and operations namely, transient pipeline analysis, liquid and slug management/mitigation, wax management/mitigation, compressor surge protection, plant operability and controls optimization.

He is currently an industrial advisor and adjunct lecturer for several universities in Malaysia as well as registered professional engineer with the Board of Engineers Malaysia, a Chartered Engineer and Fellow of the Institute of Chemical Engineers.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenter's own and do not necessarily represent those of IChemE or the Oil and Natural Gas Special Interest Group. The information is given in good faith but without any liability on the part of IChemE.

Time

18:00–19:15 MYT.

Software

The presentation will be delivered via GoToWebinar®. Check system requirements.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

Webinar archive

This webinar is free of charge and open to all to attend, but if you wish to access the slides and a recording to replay on demand then you will need to be a member of the Oil and Natural Gas Special Interest Group.

Get involved

Would you like to give a talk at a SONG event in Kuala Lumpur, or online to a wider audience of chemical engineers in the Asia Pacific region? We would like to hear from you. Please contact the Malaysian Team with details about yourself and proposed a presentation.