Overview

The HAZOP process was developed over 50 years ago by ICI. This webinar, as part of IChemE's centenary events, celebrates this. Alongside HAZOP, complementary hazard studies were also promoted within ICI. Since then, much focus has been placed on HAZOP as the tool to assess process plant design. This webinar seeks to remind Members that HAZOP is part of a multi-stage process (typically six stages prior to decommissioning), and there is value in completing all the stages.

Speakers 

Robin Turney, Safety and Loss Prevention Special Interest Group Committee

Robin held a number of design and operational positions in ICI before being appointed corporate lead on Hazard Studies and Risk Assessment. He served as chair of the Institution's Loss Prevention Panel and led the development of the course, Fundamental of Process Safety. He also represented the Institution on the EFCE Safety and Loss Prevention working party and on leaving ICI was appointed Technical Director of European Process Safety Centre. Currently he is a member of the Institution's Major Hazards Committee. He co-edited the book Risk Assessment in the Process Industries.

Steven Murphy, Head of Process Safety, Syngenta Group

Steven has worked for over 28 years in the manufacture of Fine Chemical Active Ingredients (Agrochemical and Pharmaceuticals) with increasing involvement in process safety, first with Zeneca and latterly with Syngenta. From early in his career he was nominated to be a Hazard Study Leader and he has led hundreds of hazard studies. He has also prepared technical aspects of COMAH safety reports, defended the company hazard study process with regulators and has designed process safety standards. In his current role he sets the Syngenta direction on Process Safety at a global level.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenters' own and do not necessarily represent those of IChemE or the Safety and Loss Prevention SIG. The information is given in good faith but without any liability on the part of IChemE.

Time

08:30–10:00 BST.

Software

The presentation will be delivered via GoToWebinar®. Check system requirements.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

ChemEng Evolution

This event is run in conjunction with IChemE’s centenary activities. For more information, resources and events of this nature, please visit the ChemEng Evolution website.