1. Accident investigation – missed opportunities

T. A. Kletz

View document

2. A Janus approach to safety

J. Bond

View document

3. How the study of accident case histories can prevent runaway reaction accidents occurring again

J. -L. Gustin

View document

4. A systematic approach to reactive chemical analysis

M. S. Mannan, W. J. Rogers and A. Aldeeb

View document

5. The role of the chemical safety board in preventing chemical accidents

G. V. Poje and I. Rosenthal

View document

6. The thermal screening unit (TSU) – A tool for reactive chemical screening

J. Singh and C. Simms

View document

7. Runaway reaction during production of an Azo dye intermediate

S. Partington and S. Waldram

View document

8. Large scale calorimetry

P. J. Duggan, S. Hollingworth and M. Martin

View document

9. Non-Isothermal heat-flow calorimetry for batch and semi-batch process development

J. Bickerton and A. W. Timms

View document

10. Mis-identification of chemicals

M. Powell-Price and G. W. Suter

View document

11. Evaluation of the UN vent sizing method for organic peroxide tankers

J. A. Hare and W. D. Adams

View document

12. Consequences of jet-fire interaction with vessels containing pressurized reactive chemicals

T. Roberts, H. Beckett, J. Hare, M. Royle and I. Buckland

View document

13. An experimental study of spreading liquid pools

R. P. Cleaver, P. S. Cronin, J. A. Evans and I. L. Hirst

View document

14. Project on loss of containment potential from tanks containing hazardous substances

A. Khandelwal

View document

15. Directed water deluge protection of liquefied petroleum gas vessels

T. Roberts, H. Beckett and I. Buckland

View document

16. Explosion venting of bucket elevators

P. Holbrow, G. A. Lunn and A. Tyldesley

View document

17. Mechanical ignition of dust accumulations and the ignition capabilities of smouldering nests

G. A. Lunn and J. Gummer

View document

18. The fire and explosion hazards of dried sewage sludge

S. J. Manchester

View document

19. Thermal drying of sewage sludge – HSE's role in promoting safer plant

R. J. Easterby and A. Tyldesley

View document

20. The experimental study and simulations of tube rapture in shell-and-tube heat exchangers

A. M. Thyer, A. J. Wilday and G. Bankes

View document

21. Turbulence generated during vented gaseous deflagrations and scaling issues in explosion protection

V. V. Molkov

View document

22. The reliability and accuracy of remnant life predictions in high pressure steam plant

I. Chambers

View document

23. Preparation of a pharmaceutical intermediate: An example of how inherent safety can be maximised during the early stages of process development

S. Hallam and P. Wilkinson

View document

24. Avoiding explosions by means of inerting systems

B. J. Cunliffe

View document

25. Non-Destructive testing – Learning from the past, maximizing future benefits

H. Bainbridge and B. McGrath

View document

26. Rapid fire risk assessment

J. E. Gillett

View document

27. Integrated risk assessment of a plant handling hazardous chemicals

L. Huang, R. B. H. Tan and M. L. Preston

View document

28. Numerical risk assessment and land using planning

D. A. Carter, I. L. Hirst, S. R. Porter and R. M. Turner

View document

29. Getting full value from HAZOP: A practical approach to the assessment of risks identified during studies on process plants

G. C. Stevent, A. Verna and M. Marchi

View document

30. Trial of the “HAZID” tool for computer based HAZOP emulation on a medium sized industrial plant

S. A. McCoy and P. W. H. Chung

View document

31. Modelling of indoor releases of water reactive toxic materials

G. Pettitt, G. Bains and T. Dutton

View document

32. Motivating employees for safety success

T. R. Krause and G. Sellers

View document

33. Assessing the safety of process operating staffing arrangements

H. Conlin and P. Brabazon

View document

34. Multiskilling: Implications for safe operations

C. Horbury and M. Wright

View document

35. Recent railway industry accidents: Learning points for the process industries

C. J. Beale

View document

36. Promoting process safety in the Finnish process industry

A. -M. Heikkila

View document

37. Best practice in behaviour-based safety

M. Fleming and R. Lardner

View document

38. Autoignition of gaseous fuel-air mixtures near a hot surface

A. Ungut and H. James

View document

39. A method for assessing the consequences of small leaks in enclosures

R. P. Cleaver and P. S. Cumber

View document

40. A structured approach to inherent SHE in process and product development

M. K. Fitzgerald, G. R. Ellis and M. Recaman

View document

41. Hydrogen explosions – an example of hazard avoidance and control

I. D. Kempsell, M. J. Wakem, M. P. Fairclough and J. M. Ingram

View document

42. Air ingress into Nitrogen inerted vent pipes

P. Hooker, G. R. Astbury and G. Faure

View document

43. Response of a double cantilever frame supported pipeline to internal transmitted impulsive loads

A. D. Hallgarth and G. O. Thomas

View document

44. Hazards associated with accidental fires in clinical waste storage

S. J. Kershaw

View document

45. Benchmarking emergency management good practice – The empire study

J. Larken, H. Shannon, J. Strutt and B. Jones

View document

46. Emergency response training using new technologies

P. Topalis

View document

47. Consequences analysis, emergency response and planning for an integrated risk management system: system design and implementation

Y. H. Kim, K. H. Kim, D. P. Shin and E. S. Yoon

View document

48. Controlling and de-contaminating site wastewater

K. J. Patterson and J. Poppleton

View document

49. Towards a mature safety culture

R. Lardner, M. Fleming and P. Joyner

View document

50. Developing a database to alleviate the presence of mutual misconceptions between designers and operators of process plants

B. P. Das, P. W. H. Chung, J. S. Busby and R. E. Hibbered

View document

51. Use of the safety case as a training tool to disperse corporate knowledge

N. Cann

View document

52. IEC 61508 – A practical approach to it's application in the process industry

C. Charnock

View document

53. Distributed cognition and Human Factors failures in operating and design processes

J. S. Busby, E. J. Hughes, J. V. Sharp, J. E. Strutt and E. Terry

View document

54. Refinery fire incident: A case study of a multiple fatality incident at the Tosco Avon refinery, Martinez, California

D. Holmstrom, S. Selk, S. Wallace and I. Rosenthal

View document

55. Thermal oxidiser fire and explosion hazards

M. I. Essa and T. Ennis

View document

56. Analysing the past, planning the future, for the hazard of management

R. B. Ward

View document

57. Moving to the 2nd generation in behaviour-based safety

T. R. Krause, G. Sellers and C. Horn

View document

58. Demonstration of ALARP with COMAH safety reports

J. R. Mullins and V. K. Patel

View document

59. A regulatory view of deterministic safety analysis in the nuclear industry (some lessons for the process industry?)

A. Trimble

View document

60. Positive and negative experiences with the new COMAH regime in the speciality chemicals industry

C. J. Beale

View document

61. Moving forward from assessment to inspection – how good is COMAH?

P. Scott

View document

62. COMAH implementation in a multi-site organization

D. O'Leary and A. Stanley

View document

64. “Demonstration” under the COMAH regulations – problems and partnership

K. Patterson and N. Berentzen

View document

Poster 1. Human operator assessment – basis for a safe workplace in the process industry

D. Ionel, D. D. Ionescu, D. S. Kovacs, C. Creanga

View document

Poster 2. A methodology for the assessment of dust explosion risks: Integration into a generic assessment system

G. Haesch, K. Kanuga, P. G. Lambert, T. Milburn, O. J. R. Owen, R. J. Ward

View document

Poster 3. Sorption of cadmium using a natural biosorbent and activated carbon

P. J. Lloyd-Jones, J. R. Rangel-Mendez and M. Streat

View document

Poster 4. Safety as a need/environment protection as deed

D. S. Kovacs, D. Doru, M. Apostol and C. Creanga

View document

Poster 5. Knowledge-based approach for the identification and assessment of hazards due to static electricity

A. Kraus, H. -G. Schecker

View document