Process Management & Control

Webinar: Design of Separation of SIS (Safety Instrumented Systems)

Webinar: Design of Separation of SIS (Safety Instrumented Systems)
  • Date From 24th March 2023
  • Date To 24th March 2023
  • Price Free of charge, open to all.
  • Location Online. 14:30 GMT. Duration: 1 hour.

Overview

There is still some confusion about a key attribute of good Safety Instrumented Systems (SIS) design – specifically separation of Basic Process Control Systems (BPCS) and Safety Instrumented Systems (SIS). In this live webinar, we will cover Definitions and Standards Requirements, Assessment of Independence – Shared Valve System, Quantitative Justification of Shared Component, Additional Standards Requirements and Design of SIS Separation Workflow.

Speaker

Edward Marszal, President and CEO, Kenexis Consulting Corporation

Edward is the owner of Kenexis Consulting Corporation, a process safety consulting engineering firm that provides technical safety services for new and existing facilities including performance-based fire and gas mapping, and risk analysis for industries that manage risks related to chemicals or stored energy. Edward is also a Scientific Advisory Board Member - Purdue Process Safety and Assurance Center at Purdue University. Prior to this he was a control systems engineer at UOP. He has a BS in Chemical Engineering from the Ohio State University, a Professional Engineer (PE) Ohio and Illinois and an ISA84 Expert from the Instrumentation, Systems and Automation Society.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenter's own and do not necessarily represent those of IChemE or the Process Management and Control Special Interest Group. The information is given in good faith but without any liability on the part of IChemE.

Time

14:30–15:30 GMT.

Software

The presentation will be delivered via GoToWebinar®. Check system requirements.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

Webinar archive

This webinar is free of charge and open to all to attend, but if you wish to access the slides and a recording to replay on demand then you will need to be a member of the Process Management and Control Special Interest Group.

Member-exclusive content

Become an IChemE member to enjoy full access to this content and a range of other membership benefits. If you are already a member, please log in.


Back to events