Overview

The production of 1 metric ton (MT) of crude palm oil (CPO) results in a substantial 3.5 MT of Palm Oil Mill Effluent (POME). Presently, the treatment methods employed successfully achieve a Biochemical Oxygen Demand (BOD) of 20 mg/L, in compliance with the standards set by the Department of Environment. However, envision the possibilities if we could fully reuse this water. By implementing a recycling system, we could attain a remarkable 50% reduction in water footprint. As part of an ongoing project, a comprehensive system is being developed to effectively treat POME and recycle it for utilization within the mill, thus contributing to a more sustainable and environmentally friendly process.

Speaker

Nik Mohd Farid Mat Yasin, Head of Processing & Engineering (Covering), Sime Darby Plantation Research Sdn Bhd

Nik Mohd Farid Mat Yasin is a Chemical Engineer, equipped with a Master of Engineering Technology. Currently serving as the head of the Processing & Engineering section at Sime Darby Plantation Research Sdn Bhd, he assumes the critical responsibility of leading the modernization efforts in palm oil mills, while upholding sustainability as a paramount focus.

His contributions to the industry are widely recognized, exemplified by his remarkable track record. His groundbreaking achievements include the successful filing of four patents centered around oil recovery enhancement and wastewater treatment. These remarkable innovations underscore his unwavering dedication to advancing the palm oil industry while effectively addressing its environmental impact.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenter’s own and do not necessarily represent those of IChemE or the Palm Oil Processing Special Interest Group. The information is given in good faith but without any liability on the part of IChemE.

Time

18:30–19:45 MYT.

Software

The presentation will be delivered via Zoom.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

Webinar archive

This webinar is free of charge and open to all to attend, but if you wish to access the slides and a recording to replay on demand then you will need to be a member of the Palm Oil Processing Special Interest Group.

Stay connected

Please email to popsigmalaysia@gmail.com for any queries.

Disclaimer: IChemE will not be storing or controlling any data linked to this event.