Overview

Semantum Digital Twin solution leverages on the use of our Model Broker™ to automatically generate simulation models from data aggregation of different engineering and design sources such as piping and instrumentation diagrams (P&ID), control application software and 3D plant models.

Automatic generation of simulation models and of its corresponding control application significantly increases the digital twin implementation cost-efficiency and dramatically reduces development and maintenance time of the underlying first-principles model.

Speaker

Gerardo Santillan, Senior Specialist and Sales Manager, Semantum Oy

Gerardo is a senior specialist and sales manager for Semantum. He is an industrial automation engineer with over six years of experience on the application of process simulation and engineering automation technologies for developing digital twins. He has a DSc in IT in industrial automation from Aalto University, an MSc in machine automation from Tampere University and a BSc in mechatronics, robotics and automation engineering from Universidad Nacional Autónoma de México.

The material presented in this webinar has not been peer-reviewed. Any opinions are the presenter's own and do not necessarily represent those of IChemE or the Process Management and Control Special Interest Group. The information is given in good faith but without any liability on the part of IChemE.

Time

09:00–10:00 BST.

Software

The presentation will be delivered via GoToWebinar®. Check system requirements.

You are advised to join the webinar at least ten minutes before the scheduled start time, to allow for your computer to connect.

Webinar archive

This webinar is free of charge and open to all to attend, but if you wish to access the slides and a recording to replay on demand then you will need to be a member of the Process Management and Control Special Interest Group.