Overview

An evening event hosted by Palm Oil Processing Special Interest Group (POPSIG), supported by Oil and Natural Gas Special Interest Group (SONG) and Biochemical Engineering Special Interest Group (BESIG). This event will feature a technical presentation by Chief Engineer, Ir. Mervin from Sime Darby Research Sdn Bhd.

This event is free and open to all. Bring along your colleagues and introduce them to the Palm Oil Processing Special Interest Group (POPSING) and to IChemE.

Topic

The truth about palm oil

Today, palm oil accounts for 34% of the worlds’ vegetable oil production, with Malaysia contributing 39% of the world’s palm oil production. Being one of the major palm oil producers and exporters in the world, Malaysia plays an important role in fulfilling the needs of the growing global market as the world’s population is growing rapidly.

The oil palm tree is the most efficient crop as it produces 3.8 tonnes of palm oil per hectare of land as compared to rapeseed, sunflower and soybean oil with efficiency of 0.8, 0.7 and 0.5 tonnes of oil per hectare of land respectively. The oil palm utilizes the lowest harvesting area of 7% (20 million hectares) as compared to the total oilseed land area in the world of 289 million hectares. In terms of total world agricultural land, oil palm utilises only a meagre 0.5% of the land area as compared to 4.2 billion hectares used for agriculture in total.

In addition to this, palm oil contains almost 50% unsaturated fatty acids and the remaining is saturated fatty acids where it is used as an alternative to trans-fats. This non-genetic modified oil is also rich in antioxidants and used widely in various food and non-food products. Lately however, the oil palm industry has been accused to be unsustainable, causing major deforestation and killing of the Orang Utan and palm oil has also been linked to causing health related problems by certain quarters of the public, which led to banning of palm oil by European Union. Hence, it is a crucial time now to spread the truth about palm oil by creating awareness to shift public's perception based on actual facts of palm oil.

Palm oil milling initiatives

The production of edible palm oil generally goes through 3 stages whereby the fresh fruit bunches are firstly harvested from the oil palm plantation and then delivered to the palm oil mill to extract the palm oil from the palm fruits, after which the crude palm oil is sent to purified to edible palm oil. The palm oil milling process has faced various challenges over the years and has remained stagnant for the past 30 to 40 years. New quality requirement (of low 3-MCPD & GE), high carbon footprint, stringent environmental regulations, public perception and labour issues are the main challenges faced currently. Nevertheless, these challenges inspire research and development and implementation of technologies in the mills through innovation.

Speaker

Ir. Chew Chien Lye @ Mervin, Chief Engineer

Ir. Mervin is currently a Chief Engineer at Sime Darby Research. He holds double degree in Mechanical Engineering from Universitaet Duisburg-Essen and Universiti Kebangsaan Malaysia. He is current a Professional Engineer by Board of Engineering Malaysia. His work focuses on oil mill process improvement particularly on quality enhancement and efficiency optimisation. He is tasked to provide technical supports 4 mills on technology evaluation, assessment, advisory and troubleshooting works.

He has vast experience in conducting researches and transforming laboratory test into pilot and commercial scales. His interdisciplinary skills resulted in few successful commercialisations of in-house developed processes, where he involved in the plant process design as well as mechanical design. Mervin contributed 4 patents and 6 publications on palm oil mill process improvement. His outstanding and inventive research knowledge in engineering resulted in commercialization of three developed processes.

In 2016, he received the R&D Recognition Award for his “Premium Quality Enhancement Project” from Sime Darby Plantation. Subsequently, he won the Young Industrialist, IChemE Malaysia Award 2018 and highly commended for Palm Oil, IChemE Malaysia Award 2018 category. This year, he and his team received Best New Patent Filing for 2018 Award for Innovation Day 2019 by Sime Darby Plantation.

Time

Registration from 18:00 — the event will commence at 18:30 and close at 20:30.

Attire

The suggested attire would be formal for men and women. Improper attire such as round neck t-shirt, jeans, slippers and safety boots, etc. are not allowed.

Get involved

Would you like to give talk at a SONG/POPSIG event in Kuala Lumpur, or online to a wider audience of chemical engineers in the Asia Pacific region? We'd like to hear from you. Please contact Mohan Balasingam or with details about yourself and proposed presentation.

Webinar

For those who are unable to attend in person, this event will also be broadcasted as a webinar.